General Description

Application:
The VIANEN Basic line canopies are suitable for all types of medium and heavy duty cooking equipment such as fryers, cooking ranges, griddles and grills over wall (ADL), single island (EDL) or double island (DDL) arrangements. The canopy is fitted with a vertical front panel, which can easily be connected to a ceiling system.

Fabrication:
The VIANEN Basic line canopy is fabricated from stainless steel 304 and can be fabricated seamless up to lengths of 6 meters. The canopy is assembled by means of computer controlled seam welds and visible surfaces are ultra fine grain polished and polythene protected. Joints are provided with internal cover-plates so that no joints and mechanical fixings are visible. All metal edges are rolled smooth and are free of sharp edges and projections. The canopy lower edge is formed into a full perimeter condensation channel with inclined internal elevation to simplify cleaning and the inner edges are crush folded for safety purposes.  

Equipment:
Fecon filter
V-ITL light fitting
Grease tray
Hanging bracket

Options

The Basic Line canopies can be equipped with several options for an even better efficiency and working environment;

Water Wash system (WW)

Vianen Ultra Violet Clear Air (UV)

Front Make Up air. (MUAP)

Technical Details

Here you will find the technical information of the Basic Line canopies which are available in a wall (ADL), single Island (EDL) and double island (DDL) model. 

  

Vianen Basic  Line

The canopy is fabricated from 18 swg (1.0 – 1.20 mm thick) type 304 stainless steel.  All visible surfaces are ultra fine grain polished to 320 grit and polythene protected.  The canopy is cut, punched and folded into sub-sections of up to 6000 mm in length and factory assembled by means of computer controlled seam welds and non visible mechanical fixings. Joints are provided with internal cover-plates so that no joints and mechanical fixings are visible. 

All metal edges are rolled smooth and are free of sharp edges and projections. The canopy lower edge is formed into a full perimeter condensation channel with inclined internal elevation to simplify cleaning and the inner edges are crush folded for safety purposes. 

The canopy is equipped with a single (ADL and EDL canopies) or double bank (DDL canopy) Vianen Fecon® grease extraction filters. The grease runs off the filters into an integrated grease collecting gutter and into easily removable grease tray(s). On top of the canopy factory fitted spigots are provided for the exhaust air.

Integrated in the canopy are the Vianen V-ITL® rated IP 54 recessed light fitting(s) complete with cable to an electrical box. The V-ITL light fittings have a light level of 500 lux at working height.

Hanging brackets are fitted on the top corners of the canopy for easy installation.

Pressure drop:
Exhaust pressure drop 100 Pa